Shopping For Discount Marine GPS Electronics

No Comments



With so many options for discounted multifunction marine electronics, how do you decide which system is right for you? Here are a few pointers about features to look for in basic models and what additional features you can expect in more expensive marine GPS electronics.

Select the Type of GPS You Want

When it comes to marine GPS, you can choose between a handheld unit, a combo GPS/chart plotter or a standard GPS receiver that will be hooked to your computer. Each has its own advantages and drawbacks.

If you are looking for an accurate, but inexpensive GPS unit that can be used on and off the boat, then consider a handheld GPS with basic features. On-board marine electronics often include GPS receivers as an integrated package. You can find combo GPS fish finders, chart plotters, radars and other marine GPS combos.

Think of the Environment

In this case, the environment you and your GPS will be in. On the open water you are exposed to very bright sun, making it hard to read all but the brightest displays. Even on calm days you may experience choppy waters that will interfere with your balance. At times like this a handheld GPS with a small screen may be hard to read. What’s more, their small controls will be hard to manipulate when you are struggling to maintain your balance. If you do a lot of sailing on rough water, then consider a GPS or GPS combo that has a large display and large control knobs for easy navigation on bobbing waves.

If you have a small boat, finding shaded or below-deck space for a computer to link to the standard GPS might present a problem. Keep in mind that computer screens are not designed to be viewed in direct sunlight. Another consideration when selecting the best marine GPS for your boat is how much dashboard space you have. For a small boat and dash look for marine electronics that can be expanded in the future to incorporate other devices in a single display. For larger boats with a spacious dash, consider whether you want to load the dash up with multiple displays or if you prefer one integrated model that presents a large, high resolution viewing area. If you have a large boat it might make sense to have more than one display for your fish finder, GPS navigation and radar.

Figure Out What Else You Want Your GPS to Do

Nowadays, even the most basic budget GPS models are highly accurate and capable of storing thousands of points of interest. It might be all that you need. On the other hand, if you are into fishing, you might consider a GPS/fish finder combo. A GPS/ chart plotter multifunction unit might be especially useful to boaters.

If you are not certain whether you need some of the features, check if the marine GPS unit you consider buying offers expansion capabilities. For example, a fairly budget-friendly Si-Tex ColorMax 5 and ColorMax 7 are both basic marine GPS/chart plotter combos that can be expanded to integrate fish finder, radar and other marine electronics components.

Decide What Features You Can Do Without

Many marine GPS units are now heavily loaded with additional features. Some might be very useful while others might turn out to be nothing but costly detractors. Decide for yourself whether you need your multifunction GPS to play MP3′s, synch with your Bluetooth headset for hands-free navigation, or provide live weather updates. Compare features offered on different models at your price point. Are you paying for a high resolution display, the ability to upgrade with additional marine electronics or additional features that you will never use?

There are many good GPS marine electronics on the market. Choosing the right one is a balance between understanding what features are available, knowing your own boating needs, and comparison shopping for GPS marine electronics in your price range.

Cargo mat and window film

No Comments

One of important car accessories is window film. If you use full window film for your car, you can save 3 % fuel per year. It means you can save 132 kg of carbon dioxide. You can also prevent the radiation of sunlight so that the dashboard and car seat color will be kept. Your window car will always looks exclusive if you use the window film which just has the 20 % darkness level, 94 % infra red prevention power, and 99 % Ultra Violet prevention power. If you want to install window film for your car, you will be helped by the window film installer because you cannot put that window film by yourself if you don’t have certification training. You need a special experience if you want to put the window film.

Other accessory for your car is cargo mat. Cargo mat is very recommended accessories beside window film. This stuff also has a big function for your car. It is designed to keep your car from bad problem caused by bad weather. Your car can be easily cleaned. Mud and dirt can be easily cleaned. If you want to keep your load inside your car become safe, you should take this property. Don’t think twice to grab it fast.

Checking Car’s Oil Level

No Comments

One of the most important things that should be done for ensuring that the car engine lasts long is to check the oil level. It is the oil that keeps the car running and without it a car can be driven for even three miles. Most of the garages will check your car’s engine oil for free or at a minimal cost but the good thing is that it can also be done personally at a regular basis. There is no need to worry because it is really very easy to check the oil level of a car. Following are the simple and easy steps for doing this.

Things Needed
-  Engine Oil
-  Funnel
-  Old rag or some pieces of newspaper

Procedure
1. Before the oil is checked, the car has to be parked at a leveled surface so that the oil will remain level enough for getting an accurate reading on the dip stick.

First, the bonnet has to be opened using the release catch under the dashboard which is mostly on the driver’s side or sometimes on the passenger’s side or the latch below the bonnet can be squeezed.

2.

The engine has to be warmed and then it has to be cooled for 20 – 30 minutes so the oil will seep back into the sump. This will help in ensuring that the reading is more accurate. It should be remembered that this has to be very carefully done because the engine will still be hot for a couple of more hours.

3. Next, the dip stick has to be found which is usually a long piece of metal with a holder that sticks out of the car engine. It normally has a loop on its end that can be yellow or red in color. ‘OIL’ is labeled on some of them and are at the engine’s front side.

4. Once the dip stick has been found, it has to be pulled by putting the finger through the loop. The place from where it is removed should be noted so that it can be returned especially if it is your first time. The dipstick is to be cleaned with the rag of pieces of newspaper for removing all the oil traces.

5. Once the dip stick has been cleaned, it has to be put back in to the hole from where it was removed.

6. Now, the dipstick has to be pulled out while making sure that it does not touch come in contact with the tube or engine because this would affect the reading. There are two lines at the top of the stick and on the edge which represent the maximum and minimum points. The ideal oil level is between the two lines. It will not be a problem if it is higher unless it does not rise above the maximum line. If the level is slightly lower, then oil would have to be added. Before adding oil, the dipstick should be put back in. It should be made sure that the engine must not be overfilled because it can get messy.

Some helpful tips
If the car has been driven, then it should be left for about an hour so that the engine and other parts can cool down for avoiding any risk of injury before checking the oil level.

Checking a car engine’s oil level is not very difficult and these simple steps are easy to follow.